Water Surveys

 


If the water in the geomembrane lined pond, impoundment, or tank is too deep or the water in the pond is unsuitable for personnel to wade, then the towed probe survey mode is used. While standing on the top of the side slopes, survey personnel systematically pull the probe back and forth across the bottom of the pond along temporary survey lines. When detected, the distances to the leaks are immediately marked on the liner of the closer side slope.

Water Surveys

Comments

Post a Comment

Popular posts from this blog

ASTM D6747

Image
  The electrical leak location method is a powerful tool used to detect electrical paths through leaks in a geomembrane liner.Electrical measurements are then made on the soil or in the water to locate these points of current flow through the leaks. ASTM D6747 describes the various implementations of the method.Electrical leak location surveys are conducted on the primary or secondary geomembrane liners with water or soil covering the liner. ASTM D6747
Read more

Leak Location Testing

Image
  Leak Location Services, Inc. (LLSI) is the world leader in geoelectric leak location testing.The technical staff of LLSI have a combined total of more than 80 years of commercial geomembrane leak location experience. LLSI has performed more than 3,754 leak location surveys and surveyed more than 580,561,500 square feet of survey. Leak Location Testing
Read more